Post Consumer vs. Pre-Industrial Recycled Content: What's the Difference?

ToolBox

2,410 Views

0 Comments

Print this page

Add Favorites

Question:

Isobel asks: Hi, this question is in relation to MRc4 – recycled content under LEED NC2.2. I have data from a vendor for a product that lists the recycled content under a column “Post Industrial”. How does Post and Pre Industrial fit into the requirements of Post and Pre Consumer? Or does it?

Answer:

Hi Isobel,

The differentiation of Post-Industrial content is very important for LEED because essentially it’s the same thing as Pre-Consumer. Pre-consumer recycled content (Post-Industrial) is the percentage of materials in a product that is recycled from manufacturing waste. Examples include planer shavings, sawdust, bagasse, walnut shells, culls, trimmed materials, over issue publications, and obsolete inventories. Scrap items capable of being reclaimed within the same process that generated them are not eligible.




Pre-Industrial isn’t really a term used to describe materials, as really ‘pre-industrial’ materials are just raw materials or resources to begin with.

sunset183Postconsumer materials is defined as waste materials generated by households or by commercial, industrial and institutional facilities in their role as end-users of the product, which can no longer be used for it’s intended purpose.

As they relate to each-other, Postconsumer is more heavily weighted than Preconsumer (Post-Industrial), as you can see from Equation 1 below:

Equation 1 from that credit’s section in the reference guide:

Recycled Content Value ($) = (% Postconsumer Recycled Content x Materials Cost) + 0.5(% Preconsumer Recycled Content x Materials Cost)

So assuming you have two material options, both with the same cost, it would be advantageous to credit calculations to opt for the one with higher Post-consumer Recycled Content, which makes sense, since that material would be more likely to become waste since it’s already at its end-user.

The LEED MRc4 template will do the calculations for you, but when collecting supporting documentation the following items are recommended:

* Record product names, manufacturers’ names, costs, percentage post-consumer and pre-consumer (post-industrial) content.
* Collect cutsheets or manufacturers’ letters to document the listed products’ recycled content.
* Where appropriate, maintain a list of actual materials costs, excluding labor and equipment for CSI Division 03-10, 31 (Section 31.60.00 Foundations) and 32 (Sections 32.10.00 Paving, 32.30.00 Site Improvements, and 32.90.00 Planting) only; including Division 12 is optional.

Furniture and furnishings (CSI Division 12 components) must be excluded or included consistently across MR Credits 3-7. This credit applies mostly to CSI MasterFormat 2004 Edition Divisions 03-10, 31 and 32. Mechanical, electrical and plumbing components or appliances and equipment are not to be included in the calculations for this credit. This is due to the fact that the relatively high-dollar value of these items would skew the results of the calculation.




Leave a Reply

Your email address will not be published. Required fields are marked *


You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

5 + 7 =